top of page

This is a Kronos Team Item - Choose "Local Pick-up" or "Team Delivery" and your item will be delivered to MNP Kronos practice when the team order comes in.  

 

This item has low stock in Canada and therfore may take longer to come in than other options.  

 

Introducing the Bont Riot TR+, the world's only carbon composite and heat-moldable triathlon shoe available at a competitive price point.

 

The Riot TR+ combines Bont Cycling's professional-level technical features including anatomical power transfer platform and last shaping based on more than 20,000 foot scans for greater efficiency and injury prevention due to incorrect knee tracking and pedal stroke.

 

The Riot TR+ utilises a triathlon-specific Velcro retention system for easy entry in and out of the shoe during transitions. The result? The most technically advanced entry-level triathlon shoe available on the market.

 

Construction

Carbon composite construction with Bont Cycling's proprietary Epoxy Thermoset Fiberglass heat molding technology.

 

Material

Microfiber upper with mesh panels for a comfortable fit with or without socks.

 

Stack Height

Best in class 4.8mm stack height (sole thickness) for improved stability, a closer connection to the pedal and injury prevention.

 

Ventilation

Mesh upper and tongueless design for breathability and rapid drying properties in all conditions.

 

Inner sole  

Lightweight, comfortable Ethylene Vinyl Acetate (EVA) designed specifically for our shoes with curved edges for a seamless transition between the foot and shoe. Sole GuardsReplaceable toe bumpers with Riot TR+ specific heel guards.

 

Cleat Mounting

Standard 3-hole road pedal configuration with alignment gridClosure SystemIndependent double Velcro with heel loop for fast transition entry and exit.Sizing19 sizes (36-50) with 5mm increments across the entire range for a more simplified sizing system.

 

Width Options

Two standard widths: Standard and wide/Asian. Read more about our specific width lasts on our Help Site. 

 

Weight

230 grams (approximate weight based on size 42 shoe).

KRONOS | Bont Riot TR+ Triathlon Shoe

269,00C$Prix
  • To find your Bont Cycling shoe size, place a piece of paper on a flat surface and place it directly up against a wall. Stand on the paper barefoot and ensure you have a 1mm gap between your heel and the wall. Plant your foot firmly on the ground and slowly roll your weight forward and onto the forefoot. For the most effective longest toe measurement, your heel should lift off the ground slight. Look down and take the measurement from the wall edge of the paper to your longest toe. Record the length. With your foot still in place, mark the widest points of the inner and outer edges of your feet. Measure the width across the widest part of your foot and record the number in millimeters. Repeat this step for both feet.

    Once the measurements have been taken, use the Foot Length Range on the size chart to find your size. The Last Length measurements shown on the chart are the exact length of the last that we use to build the shoes. This correlates to the precise internal measurement of the shoe.

    Following selection of your size in EU or USA, move downward to select the most appropriate width. We recommend adding 1mm to find the most appropriate width. For example, you are looking at a Vaypor S and have determined your best shoe size is 45 and your feet measure 105mm (left) and 107mm (right) wide, with an additional 1mm added, you would still fit within the Standard Range. If your feet measure wide than 109/110mm (size 45/10.5) you should consider Wide fit.

    NOTE: The stated size width range does not reflect the actual width of the shoe. Bont Cycling shoes are designed with structural support throughout the entire length including the forefoot and as such, the measured shoe width is designed to appropriately support the foot within the shoe. The width of the shoe will almost always be narrower than your foot which is intentional in order to provide the necessary support.

    Please also keep in mind Bont Cycling shoes are designed around an anatomically correct last suitable for cycling however, this does not mean they are built in the 'bare foot' running shoe style.

    For sizes that fall outside of our size chart, please get in touch

  • How to: Heat mold Bont Cycling shoes

    Bont Cycling's proprietary resin has been perfected over the last 40 years and is designed to become malleable at relatively low temperatures. The carbon chassis (base) of all Bont Cycling shoes can be heat molded at home without the need for specialist equipment.

    Bont Cycling shoes feature a unique bathtub-style construction which allows for small changes to fit and shape, not size. Any 'stiff' area can be adjusted during the heat molding process however, limitations do exist due to the characteristics of carbon fibre. Carbon fibre is not a highly flexible material nor is it designed to stretch when in its finished state and it's only through Bont Cycling's resin mix that allows it to be adjusted during the heat molding process.

    Heat molding will not allow modifications to the sole/base of the shoe. Small adjustments can be made to the edges and heel cup however, changes to the foot bed shape are not possible through heat molding. For those looking for greater support in the base of the shoe, please consider an aftermarket inner sole with support as required.

    Keep in mind any adjustments made to the shoe will have limitations, largely in part due to the anti-stretch upper. It's what makes our shoes so robust! 

    Heat molding is only designed for very small changes to fit, 1-2mm at most. 

    NOTE: Use of a microwave oven will damage your shoes and void warranty. 

    STANDARD INSTRUCTIONS

    Pre-heat the oven to 70 degrees Celsius / 160 degrees Fahrenheit (70°C/160°F).

    To mold your shoes, remove any cleats, cleat mounting screws and innersole before molding. The BOA Fit System (dials and BOA laces) do not need to be removed. Failure to remove the innersole can result in it becoming deformed by the heat. 

    Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your shoes. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Install the inner soles and place your feet in the shoes. Tighten the BOA dials and/or Velcro straps gently and allow to cool. If you have any lumps, minor bunions or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the shoe. You can heat mold the shoes as many times as you like.

    If for whatever reason your shoes fail to become malleable in your oven at the prescribed temperature (70°C/160°F), the process can be repeated again with the shoes left in the oven for a longer period of time, with periodic checking of the shoes every 10 minutes. There is no limit to the number of times Bont Cycling shoes can be heat molded

    Heat molding video: 

    youtube.com/watch?v=cA_sr_HTvvI&t=8s

    FIRST TIME HEAT MOLDING?

    Pre-heat the oven to 70 degrees Celsius / 160 degrees Fahrenheit (70°C/160°F).

    Take additional caution during your first heat molding experience as some oven can run hotter than stated. In addition, ensure your shoes are well away from possible hidden heating elements at the top and bottom of the oven. If in doubt, test the shoe temperature after 5 minutes and then again after 10 minutes. This will reduce the chance of unintended damage cause by overheating.

    OVEN DOESN'T GO LOW ENOUGH?

    Pre-heat the oven to 70 degrees Celsius / 160 degrees Fahrenheit (70°C/160°F).

    Bont Cycling recommend using an oven thermometer for any ovens that do not list a temperature below 70 degrees Celsius / 160 degrees Fahrenheit. As per the "first time" instructions above, set the temperature for the lowest setting and once heated, put the shoes in the oven for 5 minutes, pull them out to check the warmth and if needed, put them back in for another 5 minutes. This will reduce the chance of unintended damage cause by overheating.

    Note: Bont Cycling shoes are not eligible for return once heat molded.

bottom of page